Floral Brocade Elbow Sleeve Shift Dress

The holiday party invitations started to come in, so I thought, “I need a new party dress!”. So, I rummaged through my fabric stash, flipped through my pattern stash, and consulted my Pinterest idea boards for inspiration, and came up with the idea to make this lovely little dress!



The fabric is a lovely cranberry red, black and metallic silver floral brocade I purchased  a few years ago at Mill End Store in Portland, OR. I also had some nice black silk habotai on hand which I keep in stock for lining my nicer garments.


Metallic Brocade Material

I used McCalls pattern 6893 to make the dress, modifying the 3/4 sleeve boatneck darted bodice and straight skirt view (the sort of silly looking black and pink one at the bottom of the envelope) to eliminate the ruffle at the hem and lengthening the skirt 6 inches. Instead of making the bustier under the overlay of the top, I just cut the top, the midriff and the skirt all out of my fashion fabric as well as the lining.


I appreciate how McCalls puts out these “Create it!” patterns as they encourage the sewer to me imaginative with the pattern design and not just make the garment straight out of the pattern envelope just as shown. Why not mix it up, use the bodice of one pattern and the skirt of another, experiment with different fabrics and make your own creation! Love that.

I actually wouldn’t mind using this pattern again to make another version of it such as the halter neck bodice, the flared skirt, long or short, and I like the overlay effect with the strapless boustier underneath. So many possibilities!

So, before I started to cut into the fabric, I sat down for a moment and drew up an illustration in my Fashionary (another love of mine) just to get a better idea of what the finished dress would look like. I thought it looked pretty darn good:



This being done, I set off to cut and sew! I managed to whip up this number in one day (granted, I was snowed in and didn’t leave the house for 24 hours), which I think was pretty impressive!

I didn’t bother to make a toile this time (tisk-tisk!). I got away with it by taking careful measurements of the pattern and comparing them to my body measurements. The pattern was pretty spot on in terms of fit, so I just went for it. But before I did, I did add to the seam allowances of the skirt, making them 1″ (increasing them by 3/8″ as I cut out the pattern) just in case. Turned out the fit was just fine.

I enjoyed the process, although I took shortcuts along the way. Here I am using a wavy rotary cutter and my pinking shears to trim the seam allowances and finish the raw edges:

And inserting the invisible zipper was a breeze using my handy invisible zipper foot:


Sewing the invisible zip into the back of the dress

All in all, it turned out a great little vintage inspired shift dress! Sure, I wish I had take the time to find a really cool vintage pattern to make to really show off the fabric with pleats, tucks or an interesting drape, but I will use this pattern as a template since it fit so well to make design changes to in the future.

I will try to get a photo of me wearing the dress at one of these parties if I am able to!

Meanwhile, cheers and Happy Holidays People!



As soon as I got the invitation to a Halloween party, I was so excited for it and started planning what to make. I absolutely LOVE making costumes and love the idea of becoming a character for a day!

The party theme was going to be a spooky dark dungeon, and I thought Maleficent would be perfect. I immediately got to work on her choosing a pattern to use, what materials I would need, and of course, her accessories to complete the look.

Starting with inspiration, I searched for images of Maleficent on Pinterest and found some great ones:




I knew that I wouldn’t have time to actually make the  horned headdress and her scepter, so I ordered those on Amazon. I got the raven at a Halloween shop, and my darling Diablo was perfectly behaved the entire night!

It happened to also be pattern sale time at Jo-Ann Fabrics (luckily this happens pretty often!) and I had a 40% off coupon as well, so I headed to the store and purchased this McCalls pattern #6818 and 6 yards of black satin and lining for her costume:


McCalls 6818

I received her horns and sceptor pretty quickly and was delighted with them both!


Headdress, pattern and fabric ready to get started!


My fashion sketch, just for fun!

As I cut out the pattern pieces, I decided on what modifications and adjustments I would make to the pattern to suit the costume. I thought that her skirt part of the coat would need to be fully enclosed (not the open front as on the pattern) and the collar would really be the focal point. I also wanted pockets in the coat dress so that I wouldn’t have to worry about carrying around a purse.

I also wanted the jacket to close up in the center front, so I added an invisible zipper here instead of the hook and eye closure as the pattern had.

So, I used the back pattern piece of the skirt as the front as well instead of making a new pattern piece. I added 3 inches to the skirt length to be sure it was floor length on me, and added pockets to the side seams of the skirt as well as an interior pocket inside the bodice lining.

I had some leftover faux fur and some faux leather from another project that I used for the collar which was perfect! I used the faux leather for the under collar and the fur for the upper collar. I spotted some beautiful feathers at Mill End Store in Beaverton, so picked those up, along with super stiff interfacing, to add to the drama of her collar.


For her dramatic medieval sleeves, I chose a black stretch velvet (the cheapest velvet I could find!) to line them. That was probably one of the most difficult parts of this to sew just because of the slippery satin and the nature of the velvet to sew together. But, with careful pinning and slow sewing, I got through it.

In the end, after hours of cutting out, fitting and sewing, I really love how my costume turned out! I love the dramatic collar, the bell sleeves, and the little corset lace-up on the back. Plus, the pockets were the perfect little convenience to stash my cell phone, ID and lipstick 🙂






Diablo was a perfectly behaved companion



Beware of the darkness…

I’ll be wearing this costume for years to come, and hope to add to it with a long cape, some gloves, maybe even wings!


Happy Halloween!

Floral Print High-Waist Pencil Skirt

It’s fashion show time again here in the great city of Portland, Oregon, and that means time to bust out the best wardrobe to wear! For the occasion, I finally got around to make up this pencil skirt that I have been wanting to sew for some time now:



Cheers to my new skirt!


The fabric is the showcase for this project. It’s silk twill from the late designer Oscar de la Renta that I purchased from Mood Fabrics online. I’ve had this beautiful (and spendy) fabric in my stash for two years, and was overdue for it’s time to be made into something wonderful.


Oscar de la Renta Silk Twill


I have been saving some pins on my skirt inspiration board on Pinterest in hopes to make up a simple, yet wonderful, pencil skirt in a floral fabric:


Burda Pattern 7124 was my choice to make up this skirt as I love the slim fit and the high waist of view B:


Burda Pattern 7124


The pattern was a little bit of a challenge to read and interpret the instructions, as well as keep all the pattern pieces of the waistband and waist yoke of the fashion fabric, the lining, and the interfacing straight, marked and in order, but other than that, it was a fairly easy pattern to work with. I added two inches to the hem while cutting it out in order for the finished length to hit just below my knee.

Here is my pattern all laid out on the silk (after making up a muslin mock-up of course) and ready to cut:


Pattern layout moments before cutting


I chose this pattern also because of the nice walking slit and the full lining. I felt that this skirt in this special fabric deserved those features!

I used some black silk habotai that I had in my leftover scraps from another project to line the skirt and that worked out beautifully.


Hand sewing the interior facing and lining to the zipper

I really love the finished result of this skirt and will wear it a lot.


Interior of the skirt


love how the back yoke pieces create the high waist


Front of the skirt


I have about a yard of fabric left over from this project, and may make up a matching top at some point to make this into a two-piece dress outfit. Or, if somebody comes along and would like me to make them a custom skirt or dress from the remaining yardage, let’s talk!



Ikat Print Pleated Skirt

It’s been HOT here in Portland, in the 90’s the past few days, and I’ve been only wanting to wear dresses and skirts to try to beat the heat.


On my sewing to-do list have been fun, lightweight and easy to wear skirts. As an inspiration,  I’ve seen cute printed a-line or pleated skirts that are fast and easy to sew, and even easier to wear. Here are some of my inspirations:

I had some nice black and white Ikat printed medium weight cotton fabric in my stash,



plus black Bemberg rayon lining material which I usually have on hand or left over from another project, so I decided to make up a cute little pleated skirt for myself using New Look 6873 pattern which I have had forever in my pattern stash:


New Look 6873 pattern illustrations

Well, the pattern sizing turned out to be pretty terrible and I spent most of my time fitting, ripping out stitches, and re-sewing this skirt. It was HUGE! I followed the size chart and cut the size that matched closest to my measurements. I had to take out about 2 inches at each side seam of the skirt and the waistband in order for the skirt to even come close to fitting my waist. It was almost as if I had forgotten to sew a couple of pleats it was so big!

After fitting it and re-sewing, the skirt took about twice as long as it could have to make. Plus, I added a lining to this using the pattern pieces of view C, the A line skirt with no pleats. so that added some additional time, but totally worth it.

All said and done, I probably won’t sew this pattern again. I really should be drafting my own patterns at this point anyway. I thought it would be a time saver to use a commercial pattern where the pattern work was done for me, but that was not the case here.

Oh well, now I have a cute little skirt in a great print and I am happy!





Stay cool!




Vintage Inspired Fancy Nancy Dress

My dear friend Nancy asked me if I would be willing to make her a dress to wear to a wedding she and her husband were going to in England. My reply was “Of course! I’d be delighted to!”. So the journey began!

She wanted to use her wedding gown to remake into a dress to wear to the wedding. How special is that! Her gown was made of silk duppioni and there was plenty of it to work with. The only issue was that it had never been cleaned since her wedding (at least 12 years ago, maybe more) and had been stored with some stains on it. Of course we would need to dye it as well, and I have never dared to dye fabric before, let alone a keepsake wedding gown, so after some thought and debate, we decided to scrap the upcycled wedding dress idea and purchase new fabric. This would save time in the long run, plus spare the wedding gown in case I were to completely mess it up (what me, mess up? Never!).

She loved the idea of wearing a girly dress; something fitted at the bodice and poufing out from the waist. We created a Pinterest board and shared ideas of wonderful dresses for inspiration.The dresses we swooned over were designer dresses in beautiful fabrics and feminine details such as pleats and tucks. And how wonderful it would be to also have pockets!

Here are some of our favorites:


So I searched and found a nice vintage pattern to use to make the dress. I found this Vogue pattern that was originally released in 1957 that she also loved:


Vintage Vogue Pattern 2903 Envelope


It featured a wide, face flattering off shoulder v-neckline, a nipped in waist, and lovely pleated skirt. The dress did not, however, include instructions for a full lining, or side seam pockets, so I added those features on my own.

With the pattern decided, let the fabric shopping begin! This was the fun part, as there are so many lovely fabrics out there that would be wonderful for this dress.

After about 578 swatches ordered (slight exaggeration), she chose a beautiful gold floral silk jacquard by designer Carolina Herrera purchased from Mood Fabrics website:


the magnificent silk jacquard Caroline Herrera fabric draped and pinned to my dress form

This fabric is amazingly beautiful! The gold really shimmers and catches the light as it moves, and the background color changes from a brown, to a purply-taupe, to a navy blue.

Once we had the main fabric, we headed out to Mill End Store in Milwaukie, Oregon to find a nice lining material. Together we chose a lovely navy silk twill to line the dress in. Later, as I was making the dress and installing the lining, I told her I almost like the lining as much as I like the dress! It really turned out beautifully and looked so luxurious.

So, I hunkered down and got to making the fitting muslin toile for her. The fitting went well and she was already happy with the shape and style of the dress so far:


As for the pattern fit, the list of changes I was to make were as follows:

  • no sleeve
  • take up at the shoulders
  • take in the bodice at the princess seam along bust line
  • take in at side seam of bodice
  • shorten entire hem length by 6″

And design additions and changes to the pattern included:

  • cut the center front panel out of one piece, eliminating the center front seam so not to “interrupt” the beautiful pattern on the fabric
  • add side seam pockets
  • add full lining
  • take center back zipper all the way up to the top of the dress (the zip was originally designed to be centered within the dress for some reason)
  • add lingerie hooks at shoulder to secure bra straps


After the muslin fitting, I got back to my sewing table, took apart the muslin dress, and transferred the changes to the original dress pattern pieces as needed and made a new center front pattern piece with no center seam. Then I got to cutting the dress out of the fabric.

Sewing up the dress the second time around in the fashion fabric did go much faster than the first time out of the muslin, just because I knew what to expect when sewing, and had basically done it all before.

This time, I made the lines and sewing markings for all of the pleats on the outside, the right side, of the fabric with chalked tracing paper so that is was much easier to find them when it was time to fold and sew the pleats down.

Here is a photo of one of the pleats folded from both sides into the seam, basted down, then pressed:


a pleat sewn and pressed


Extending the zipper all the way to the top of the back of the dress made sense and was easy to change on the pattern. Here, I am hand basting in the zip in to the center back seam, using a bright teal silk thread, before I sew it in on the machine:


center back zipper basted in

Once I had the dress sewn up (for the most part), I scheduled another fitting with my friend. I wanted to make sure that everything was going well before I cut, sewed together and installed the lining.

Everything looked great and fit well, needing only a few tweaks to fit around the bodice and the decision to add the yoke piece to the neckline:


Fitting #2 in the dress

It was time to cut the lovely silk lining!


cutting out the navy silk lining


I used the same pattern pieces as the dress, sewed it together in the same manner (minus the pockets), and sewed it to the neckline and armholes of the dress, under stitching as far as possible to keep the lining to the underside of the neck and arm openings.

Finally, after hours of fitting, cutting, sewing, pressing and steaming, the dress was complete! I am very happy with the result of the dress,


and Nancy was just delighted to wear it to the wedding in England:


Doesn’t she look fancy and marvelous wearing her new custom made silk frock, complete with wonderful gold shoes and a great feathery fascinator? I think so!



Cross Bodice Jumpsuit

I made up this pattern in my Advanced Pattern making class that I have been taking at Portland Fashion Institute as a part of my first collection for my label Love, Stephanie.



I got about 4 yards of a lovely silk twill-like material that had just the right amount of drape to it without being sheer or flimsy.

I love how easy and free-flowing this jumpsuit looks and feels:


It was a fairly easy design to create. I made a cross bodice top with a back zipper opening, drafted a long sleeve with a wider sleeve hem, made a wide leg palazzo pant, and sewed them together at the waist and added elastic. I then whipped up a simple sash and tied it loosely at the waist Boom! Done!



I have been admiring the whole jumpsuit trend and have been saving up inspiration photos on Pinterest:

Love it! I can now take what I have made and create different versions of it; narrower leg, sleeveless, halter top, all kinds of fun and fashionable looks. Sew exciting!!

Thanks for stopping by and stay tuned for more custom designs from me!






Animal Print Brocade Holiday Party Dress

I love this dress! I thought it would be too poofy and make me look bigger than I would like to look, but after wearing it, I was OK with the poof.


V1434 in animal print brocade

Vogue Pattern 1434 by Isaac Mizrahi in animal print brocade


I used Vogue 1434 to make this dress. It’s a Vogue Patterns American Designer pattern designed by Isaac Mizrahi:

V1434 Pattern Cover

V1434 by Isaac Mizrahi Pattern Cover

V1434 Line Drawings

V1434 Pattern Envelope Back and Line Drawings

I cut out this dress in a size 14, making a fitting muslin of the bodice first, which took some minor tweaking at the shoulders and bust princess seams, but the fit was pretty great overall. I cut it from a beautiful Italian animal print cotton blend brocade in metallic cream, rose and peach shades from Oscar de la Renta I ordered from Moodfabrics.com:

Oscar de la Renta Cream/Wint/Rose/Peach Animal Italian Cotton Blended Brocade Fabric

Oscar de la Renta Cream/Wint/Rose/Peach Animal Italian Cotton Blended Brocade Fabric

Pattern Cutting the Brocade

Pattern Cutting the Brocade

I had a nice red silk crepe de chine fabric in my stash that was just barely enough yardage to fully line the dress:

cranberry red silk crepe de chine for the lining

cranberry red silk crepe de chine for the lining

The dress was fairly easy to construct with a basic princess seam sleeveless bodice and full pleated skirt and deep pockets, lined by the same pattern pieces for the bodice and different patterned pieces for a gathered skirt lining.

The most time consuming part was making the pleats.

I traced the pleat placement using the handy pleating guide included in the pattern pieces:

Pleat Guide Pattern Piece

Pleat Guide Pattern Piece


I found that this would have been helpful had all my pleat tracing work had actually shown up and stuck to the brocade fabric once it came time to sew them. Instead, I actually held the guide up to my fabric as I pinned each pleat in place, then carefully basted them down:

Pinned and Sewing Pleats

Pinned and Sewing Pleats

This took the most time and attention, but it was worth the work!

finished dress!

finished dress!

I love how the lining turned out, accept the fact that I didn’t take the time to make French seams on the skirt as the inside of the lining could show my mistake or if anyone looks at it throughly inside and out. Oh well, I might just pink the seam edges so they don’t fray.

Mood Fabrics even sent a little label with the fabric that I sewed into my dress below my Love, Stephanie label. Oh, the little things make all the difference!

Labels Pinned and ready to Hand Sew Into Lining of Bodice

Labels Pinned and ready to Hand Sew Into Lining of Bodice


Lining of Bodice with Labels

Lining of Bodice with Labels

this dress is fully lined in red silk crepe de chine

this dress is fully lined in red silk crepe de chine

This dress was a huge hit at the two little holiday parties I went to Saturday, and I plan to wear it to another party on Sunday! I even met a woman who wants to talk to me about making some custom dresses and apparel for her! Plus, friends of mine have been dying for me to make them something custom, and we have some really great project ideas in the works! So exciting!

I was going for a dress inspired by these dresses I pinned on Pinterest:

Eliza J dress at Nordstrom

Eliza J dress at Nordstrom

Lanvin Jaquard Dress

Lanvin Jaquard Dress

It is so very cool to be able to make my own clothes, and then wear them and “sell” my work to others!

The Deep Pockets are Wonderful!

The Deep Pockets are Wonderful!

Love My New Dress!

Love My New Dress!


Merry Christmas, Happy Holidays and  and Happy New Year to ALL!!! MWAH!!

Colorblock Dress

I busted out this dress, hopefully just in time to make the deadline for the Patternreview Colorblock Contest! If not, no biggie, just a prize gift certificate to my favorite online fabric store, Mood.

There were a bunch of wonderful entries, so I might have come in about 5th place, maybe, with this little dress:



I saw this dress pattern, Burda 6851:


on the Simplicity.com website, and thought it was perfect for a color blocked project (I believe my first!), and something I could easily interpret for my needs.

Once I started researching the pattern online (Google, Yahoo Images), with only one other pattern review on Patternreview.com, I found that someone pinned on Pinterest this pattern as an, um, EXACT copy of a Donna Karan dress from her Fall 2015 line, so of course I was even more excited to make this dress!


This dress was a pretty simple sew. The hardest part was adding the zipper, which was instructed as an invisible zipper, but I chose a semi-exposed, plastic zipper with black trimmed zipper teeth, a black zipper pull, and a clear white plastic zipper tape, as my seemingly cool zipper alternative:


Well, my cool zipper idea kind of backfired because the zipper is a tad too heavy and stiff for the ponte knit weight, and the ends of the zipper are super plastic-y and won’t behave with the top and bottom seams, thus leaving a bumpy, lumpy and scratchy interior of the zip area. Not great, but a good effort.


Had I had the time, and sewing buddy to help, or an exact clone of myself to come in handy, I would have “pinched out” at the mid back of this dress to avoid that nasty bubble at the back. I also would have adjusted the underarm weirdness at the dolman sleeve “meeting”:


As well as lost the trying-too-hard “deer in headlights” look on my face. Really Steph?



Overall, it was a great dress to sew up in a few days. I may sew it again, I may not, but I really should be making my own patterns at this point, and making them unique.

Oh well! I enjoy letting others do the pattern making (thank you Burda!), and doing the fabric and construction stuff for me, thus my love affair with commercial patterns!



Tootles for now and see you soon!

Happy Holidays!




Sequin Mesh Strapless Gown

I finished this dress in the nick of time to wear out to the Portland Fashion and Style Awards held at the Portland Art Museum last night.

black sequin gown from Vogue 2237

black sequin gown from Vogue 2237

I love simplicity of this style and the slight train on the back of this gown:

Back of gown

Back of gown

Credit must be given to Vogue Patterns for putting out this designer pattern number 2237 from Badgley Micshka. This was a wonderful pattern to sew as it went together fairly simply and was a good learning experience.

V2237 Badgley Mischka gown and bolero

I traced off the pattern on to Swedish tracing paper and made adjustments to the length of the bodice and the skirt. After measuring the pattern and comparing them to my body measurements, accounting for an additional 3″ high heel, I found that I needed to add 2″ to the bodice and 5″ to the skirt portion of the pattern.

I then cut out and sewed up a muslin of the gown as well as the corset for fitting. My lovely friend helped me pin this dress and make notes on the muslin where to take in and let out.

I found this lovely sequin mesh polyester material at Fabric Depot in Portland, Oregon and thought it had the perfect drape and sparkle for this project.

I got a flesh colored Ambiance lining that matched the color of my skin to line the dress so that it appeared to be see-thru when wearing:

The sequin mesh material was perfect to sew with as it is very soft and the sequins are as well. I was able to sew it without having to remove the sequins from the seam allowances with saved a bundle of time.

I love the scalloped and fringe-like selvedge of the material and was hoping to trim it off and incorporate it into  the dress either at the hem or the top edge, but I ran out of time to do this. I suppose I can go back and add it at another time, or use it for another project. It is just too pretty to toss out!

Here is the muslin and sequin fabric draped on my dress forms:

draped and muslin V2237

sequin fabric draped and muslin pinned to dress forms

The pattern design includes a corset-like under structure that holds up the strapless gown that is sewn into the lining. I added 3 additional boning channels to this at the front and under the bust for added support.

I used a heavier weight muslin for the structure part of the corset and the same lining as the gown to line it. Turned out really great!

I did have to make several fitting adjustments to the outer part of the dress as at first the muslin needed to be let out, but then in the sequin material, which does have a lot more “give” than muslin, I had to take it back in. I had to make fitting adjustments a couple of times actually, in order to get the nice tight fit that a strapless gown requires in order to stay up. Thanks to my part time job doing bridal and special occasion gown fittings and alterations at David’s Bridal, I have learned a great deal about fitting gowns and this knowledge came in quite handy!


After many hours of fitting and sewing this dress (and leaving off some steps as time was up!), I really love the outcome of the gown and was excited to wear it to the big event! I may go back and make adjustments to the “peaks” of the bodice so that they are a little pointier and less rounded at the top, and the lining drove me nuts all night as it was coming up over the edge of the dress and showing! At least the lining is flesh colored and it was not as noticeable, but I still was not happy with that.

After looking at photos, maybe the bodice was a little too tight as my boobs looked kind of squished. I guess I didn’t realize that I can fake a pretty good cleavage in this kind of dress! Cool!

I was rushing to finish in time (as usual) and sewing on the hook and eye at the back when I was supposed to be on my way to my friend’s house to get ready, but we made it in perfect timing, so it was  all good in the end.

V2237 lining and label


black sequin gown from Vogue 2237


Back of gown

Very good actually!



And here I am wearing a little hat designed by ElizaBeth Rohloff. She was nominated at the Portland Fashion and Style Awards for Best Accessory Designer, but sadly didn’t win (this time!). It was fun to wear!

V2237 and hat

Off to the event! Bye!



Draped Back Jersey Dress

I drafted and sewed up this loose fitting draped back dress using the guidance of this blogger Moldesdicasmoda:

Back of draped back dress

It was a fairly simple dress to sew, with just a front, back and back band piece to make.

Pattern from the blogger Moldesdicasmoda.com

Pattern from the blogger Moldesdicasmoda.com

I lowered the front neckline, but I think I took a little too much off as it sits pretty low in front:

Front neckline

Front neckline

I added a little stripy bralette from Free People underneath the top for interest under the drape:

with Free People strappy bralette underneath

with Free People strappy bralette underneath

This is a super comfortable dress to wear as it is an essentially shapeless fit.

Loose fitting dress, but still chic

Loose fitting dress, but still chic

I am quite happy with it overall, and it was a lot of fun to wear to a fashion show in town!

Just throw on some heels and go!

Just throw on some heels and go!